Unipulse ControllerTechnical Spcification TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION

 1     Type                      :   Micro-Processor based Load cell based 

                                         Electronic weighing & Bagging.

     

 2     Material to handle :    Powder

         3     Type of Feeding     :     Screw Feeder              

                                                     

 4     Weighing Range    :     50Kg  

 5     Rated output         :     120 Bags/ hour

 6     Accuracy               :     Average  ± 40 to 60 gms

 7     Bag clamp             :     Pneumatic.

                                           open mouth Jute, HDPE & Paper bags.

             

 8     Power supply         :     440 volt 3 phase

9    Compressed Air        :    Instrumental Air 20.1 ltrs per weighment

                                           at 5 to 6 kg/cm², working Pressure.

NOTE  :- The  above mentioned output, and accuracy will be subject to the full fillment of following conditions.

        1)    Uniform inflow of material.

        2)    Sufficient air pressure.

        3)    Moisture level should be below 40%.

        4)    Machine should be free from vibration.    

5)     Proper earthing of Load cells with separate earth pit.

                                                                                 

                                                                         For Hi-Tech Engineers