Hi-Tech Micro-Processor based
weighing & Bagging Machine
TECHNICAL SPECIFICATION Duplex machine
1
Type : é
Micro-Processor based Electronic Duplex Nett
Weighing
& Bagging Machine
2 Material to handle : Refined
Sugar.
3 Controller : Flintec FT-13 German Make
4
Type of Feeding : 3 speed segmental Shutter Gravity feeder
for
Coarse,
fine & super fine feed.
|
5
|
Weighing range
|
50 Kg
|
100 Kg
|
|
6
|
Rated out put
|
16 to18 bags/min
|
10 to 12 bags/min
|
7 Accuracy : Average
± 20 gms in an ave of 20 consecutive
weighment.
8 Bag clamp : Pneumatic
Bag Clamp Suitable for 50 &
100kg open mouth Jute, HDPE & Paper bags.
9 Power supply :
220 volt Ac 50HZ.
10 Compressed Air :
Instrumental Air 20 ltrs per weighment
at 5
to 6 kg/cm2.
11 control panel :
Panel type fully wired control panel.
NOTE :- The
above mentioned output, and accuracy will be subject to the full
fillment of following conditions.
1)
Uniform inflow of material.
2)
Sufficient air pressure.
3)
Material free from moisture and lumps.
4)
Machine should be free from vibration.
5) Proper
earthing of Load cells with separate earth pit.
For Hi-Tech Engineers
Posts
No comments:
Post a Comment